Designing 4543 CMOS Clock Altium Pt41
PCB Editor Only Shortcuts
Shift+R
Cycle through three routing modes
Shift+E
Toggle electrical grid on/off
Shift+B
Build Query
Shift+Page Up/ Page Down
Zoom-in/ zoom-out in small increments
Ctrl+Page Up
Zoom-in to 400%
Ctrl+Page Down
Fit document into view
Ctrl+End
Jump to defined relative origin for the workspace
Alt+End
Redraw current layer only
Alt+Insert
Paste on current layer
Ctrl+G
Pop up Snap Grid dialog
G
Pop up Snap Grid menu
N
Hide the ratsnest while moving a component
L
Flip component being moved to other side of board
Shift+F1
Pressed while routing, then displays the appropriate interactive routing shortcut keys
F2
Display Board Insight and Heads Up display options
Ctrl+Left-click
Highlight routed net under cursor (repeat in free space to clear)
Ctrl+Spacebar
Cycle through connection lines modes during interactive routing
Backspace
Remove last track corner during interactive routing
Shift+S
Toggle single layer mode on/off
O, then D, then D, then Enter
Set all primitives to display in draft mode
O, then D, then F, then Enter
Set all primitives to display in final mode
O, then D/Ctrl+D
Access Show/Hide page of View Configurations dialog
L
Access Board Layers and Colors page of View Configurations dialog
Ctrl+H
Select connected copper
Ctrl+Shift+Left-click & hold
Break track
Shift+Ctrl+Left-click
Highlight additional routed net under cursor
+/- on numeric keypad
Next/ previous layer
Ctrl+Click
Highlights layer content on layer tabs
Ctrl+Shift+Click
Increments highlighting on layer tabs
Ctrl+Alt+Mouse
Hovers highlight layer on layer tabs
* on Numeric keypad
Next routing layer
M
Display Move sub-menu
Alt
Hold to temporarily switch from avoid-obstacle to ignore-obstacle mode
Ctrl
Hold to temporarily disable electrical grid while routing
Ctrl+M
Measure distance
Spacebar (in interactive process)
Rotate object anti-clockwise (define rotation step on PCB Editor – General page of Preferences dialog)
Spacebar (during interactive routing)
Toggle start/End mode
Shift+Spacebar (in interactive process)
Rotate object being moved clockwise
Shift+Spacebar (during interactive routing)
Step through corner modes during interactive routing
[/ ]
Decrease/ Increase mask level for permanent filter
Alt+Left Arrow/ Right Arrow
View previous/ next component for active library document
Q
Toggle units (metric/imperial)
T, then B
Access 3D Body Manager dialog
T, then P
Access Preferences dialog
Shift+Mouse-wheel
Pan left/right
Ctrl+Mouse-wheel
Zoom in/ out incrementally
Ctrl+Right drag
Zoom in/ out smoothly
Ctrl+C
Create clipboard bitmap (.bmp) image of current 3D view
Page Up/ Page Down
Zoom in/out incrementally
T, then P
Access PCB Editor – Display page of Preferences dialog
L
Access Physical Materials (3D) page of View Configurations dialog
9. 3D Body Placement Shortcuts
+/-
Next/ previous layer
L
Flip 3D body to paired mechanical Layer
X
Flip 3D body around X-axis
Y
Flip 3D body around Y-axis
Spacebar
Rotate 3D body counterclockwise
Shift+Spacebar
Rotate 3D body clockwise
2
Rotate 3D body counterclockwise around it's X-axis
3
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
4
Rotate 3D body counterclockwise around it's Y-axis
6
Rotate 3D body clockwise around it's Y-axis
8
Rotate 3D body clockwise around it's X-axis
9
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by one Snap Grid increment
Shift+Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by 10x Snap Grid increment
Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by one Snap Grid increment
Shift+Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by 10x Snap Grid increment
==================
Please subscribe our channel, thanks
For modification please contact us, thanks
Please visit, thanks
Entertainment for Engineer's break time
Rixtronix LAB Channel
https://www.youtube.com/channel/UC89se0BZ2oGeqN5jNbDAyQQ
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks
Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢
Please share a coffee with me, thanks...
Motherboard Capacitors 1800uF 16V low ESR
https://www.ebay.com.au/itm/173840921403
Motherboard Capacitors 1000uF 16V low ESR
https://www.ebay.com.au/itm/173841745704
Arduino UNO R3 CH340 1Pc Brand NEW
https://www.ebay.com.au/itm/174444869277
Arduino Mega 2560 Brand NEW
https://www.ebay.com.au/itm/174807545008
7812 Regulator Chip 12V TO-220
http://www.ebay.com.au/itm/173840902816
7805 5V Voltage Regulator 10 Pieces
http://www.ebay.com.au/itm/173373792576
MC34063 DC-DC converter control circuits DIP8 5Pcs
http://www.ebay.com.au/itm/173840921443
1N5822 Diode 10pcs 3A 40V Fast Recovery Schottky diode
https://www.ebay.com.au/itm/174166491028
3D Printer Melzi 2.0 1284P Mainboard PR Usa 1Pcs
http://www.ebay.com.au/itm/173831753941
3D Printer LCD Module 20x4 1Pc
https://www.ebay.com.au/itm/173838265965
Mechanical Watch 6 hands Automatic 1Pcs
https://www.ebay.com.au/itm/173840921415
Rixtronix Store,electronic components,3D Printer Parts and electronic modules
https://www.ebay.com.au/str/rixtronix
Please donate for buying my children's milk, thanks
http://PayPal.Me/rixtronix
MAX485 SOP8 5Pcs
https://www.ebay.com.au/itm/173840921384
Tapped Spacer M3x25 5Pcs
https://www.ebay.com.au/itm/173841750164
XR2206CP Kit with casing 1Pc
https://www.ebay.com.au/itm/174470814321
4x4 Keypad Button 1Pc
https://www.ebay.com.au/itm/174594082958
High Voltage Capacitor 22uF 400V 5Pcs
https://www.ebay.com.au/itm/174594077962
3D Printed Look Keo Cleat Thicker Hook Areas 1pair, I've tested for more than 1 year ride
https://www.ebay.com.au/itm/173910460603
Female to Female jumper wire 40 Pins 1 Pc
https://www.ebay.com.au/itm/174157283872
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks
Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢
Rixtronix LAB Log
https://rixtronixlab.blogspot.com/
https://rixtronix.joomla.com/
https://bianchi77.wordpress.com/
==================
Buy local, helps Australian grows,
Offer :
Offer :
Offer :
Buy local , helps Australian grows
Offer :
Offer :
Buy local , helps Australian grows
Offer :
Buy local , helps Australian grows
Offer :
Buy local, helps Australian grows,
Offer :
Buy local, helps Australian grows,
Offer :
==================
PCBWay, PCB Prototype the Easy Way
==================
Rixtronix LAB is volunteering on fixing electronic appliances
such as LED,LCD TV, amplifier,computer, power supply ,PS4,XBOX and so on, for local area only.
Please contact us
Rixtronix LAB 志愿维修电子设备
如LED、液晶电视、功放、电脑、电源、PS4、XBOX等,仅限本地使用。
请联系我们
Translating Johannes 8 31 36 Open Writer P4
Johannes 8: 31-36
Waarheid maakt mensen vrij
31 Jezus zei tegen de Joden die in hem geloofden:
"Als je altijd mijn zin houdt,
Is echt mijn leerling,
32 U zult de waarheid kennen,
De waarheid zal je bevrijden. "
33 Ze antwoordden:
"Wij zijn afstammelingen van Abraham,
Ik ben nooit een slaaf van iemand geweest,
Hoe zeg je ‘je moet vrij zijn’? "
34 Jezus antwoordde:
"Ik vertel je de waarheid:
Alle zondaars zijn slaven van de zonde.
35 Een slaaf kan niet eeuwig thuis blijven wonen,
De zoon zal altijd thuis blijven wonen.
36 Dus die van onze hemelse Vader
Als de zoon je vrijlaat,
Je bent echt vrij.
John 8:31-36
Truth sets people free
31 Jesus said to the Jews who believed in him:
"If you always keep my way,
Is really my disciple,
32 You will know the truth,
The truth will set you free. "
33 They replied:
"We are descendants of Abraham,
I have never been a slave to anyone,
How do you say ‘you must be free’? "
34 Jesus answered:
"I tell you the truth:
All sinners are slaves to sin.
35 A slave cannot live at home forever,
The son will always live at home.
36 So Heavenly Father’s
If the son sets you free,
You are really free.
In this video,
Open Office Keyboard Shortcut
Copy - Ctrl-C
Cut - Ctrl-X
Select All - Ctrl All
Undo - Ctrl-Z
Header :
Main Menu--Insert -- Fields -- Date ,Alt-I -- D -- D
Main Menu--Insert -- Fields -- Time
Main Menu--Insert -- Fields -- Page Number
Main Menu--Insert -- Fields -- Page Count
Main Menu--Insert -- Fields -- Author
Ctrl+A Select All.
Ctrl+J Justify.
Ctrl+D Double Underline.
Ctrl+E Centred.
Ctrl+F Find and Replace.
Ctrl+Shft+P Superscript.
Ctrl+L Align Left.
Ctrl+R Align Right.
Ctrl+Shft+B Subscript.
Ctrl+Y Redo last action.
Ctrl+0 (zero) Apply Default paragraph style.
Ctrl+1 Apply Heading 1 paragraph style.
Ctrl+2 Apply Heading 2 paragraph style.
Ctrl+3 Apply Heading 3 paragraph style.
Ctrl+5 1.5 Line Spacing.
Ctrl+ Plus Key(+) Calculates the selected text and copies the result to the clipboard.
Ctrl+Hyphen(-) Custom hyphens; hyphenation set by you.
Ctrl+Shft+minus sign (-) Non-breaking dash (is not used for hyphenation).
Ctrl+multiplication sign * (only on number pad) Run macro field.
Ctrl+Space Non-breaking spaces. Non-breaking spaces are not used for hyphenation and are not expanded if the text is justified.
Shft+Enter Line break without paragraph change.
Ctrl+Enter Manual page break.
Ctrl+Shft+Enter Column break in multi-columnar texts.
Alt+Enter Inserting a new paragraph without numbering.
Alt+Enter Inserting a new paragraph directly before or after a section or a table.
Arrow Left Move cursor to left.
Shft+Arrow Left Move cursor with selection to the left.
Ctrl+Arrow Left Go to beginning of word.
Ctrl+Shft+Arrow Left Selecting to the left word by word.
Arrow Right Move cursor to right.
Shft+Arrow Right Move cursor with selection to the right.
Ctrl+Arrow Right Go to end of word.
Ctrl+Shft+Arrow Right Selecting to the right word by word.
Arrow Up Move up one line.
Shft+Arrow Up Selecting lines in an upwards direction.
Arrow Down Move cursor down one line.
Shft+Arrow Down Selecting lines in a downward direction.
Home Go to beginning of line.
Shft+Home Go and select to the beginning of a line.
End Go to end of line.
Shft+End Go and select to end of line.
Ctrl+Home Go to start of document.
Ctrl+Shft+Home Go and select text to start of document.
Ctrl+End Go to end of document.
Ctrl+Shft+End Go and select text to end of document.
Ctrl+PageUp Switch cursor between text and header.
Ctrl+PageDown Switch cursor between text and footer.
Insert Insert mode on/off.
PageUp Screen page up.
Shft+PageUp Move up screen page with selection.
PageDown Move down screen page.
Shft+PageDown Move down screen page with selection.
Ctrl+Del Delete text to end of word.
Ctrl+Backspace Delete text to beginning of word.
Ctrl+Shft+Del Delete text to end of sentence.
Ctrl+Shft+Backspace Delete text to beginning of sentence.
Ctrl+Tab Next suggestion with Automatic Word Completion.
Ctrl+Shft+Tab Use previous suggestion with Automatic Word Completion.
Alt+W Spell checker dialog: Call back the original unknown word into the text box.
Ctrl+ double-click or Ctrl+Shft+F10
Tables
Ctrl+A If the active cell is empty, Ctrl+A selects the whole table; otherwise it selects the contents of the active cell. Pressing Ctrl+A a second time selects the entire table.
Ctrl+Home If the active cell is empty, Ctrl+Home moves the cursor to the beginning of the table. Pressing Ctrl+Home again moves the cursor to the beginning of document. If the active cell is not empty, Ctrl+Home moves the cursor to the beginning of the active cell. Pressing Ctrl+Home a second time moves the cursor to the beginning of the current table. A third press moves the cursor to the beginning of the document.
Ctrl+End If the active cell is empty, Ctrl+End moves the cursor to the end of the table. Pressing Ctrl+End again moves the cursor to the end of document. If the active cell is not empty, Ctrl+End moves the cursor to the end of the active cell. Pressing Ctrl+End a second time moves the cursor to the end of the current table. A third press moves the cursor to the end of the document.
Ctrl+Tab Inserts a tab stop (only in tables). Depending on the Window Manager in use, Alt+Tab may be used instead.
Ctrl+Shft+Arrow Up Jumps to start of table.
Ctrl+Shft+Arrow Down Jumps to end of table.
Alt+Arrow Keys Increases or decreases the size of the column or row on the right or bottom cell edge.
Alt+Shft+Arrow Keys Increases or decreases the size of the column or row on the left or top cell edge.
Ctrl+Alt+Shft+Arrow Keys Like Alt, but only the active cell is modified.
Alt+Insert Provides 3 seconds in Insert mode, during which time pressing an Arrow key inserts a row or column, or Ctrl+Arrow Key will insert a cell.
Alt+Del Provides 3 seconds in Delete mode, during which time pressing an Arrow key deletes a row or column, or Ctrl+Arrow Key merges the active cell with the neighbouring cell.
Ctrl+Shft+T Removes cell protection from all selected tables. If no table is selected, then cell protection is removed from all of the tables in the document.
Ctrl+Shft+Del If nothing is selected, the contents of the next cell will be deleted. If cells are selected, the whole row(s) of the selection will be deleted. If all rows are selected completely or partially, the entire table will be deleted.
Paragraphs and heading levels
Ctrl+Alt+Up Arrow or Ctrl+Up Arrow Moves the active paragraph or selected paragraphs up one paragraph.
Ctrl+Alt+Down Arrow or Ctrl+Down Arrow Moves the active paragraph or selected paragraphs down one paragraph.
Tab The heading in format Heading X (X = 1-9) is moved down one level in the outline.
Shft+Tab The heading in format Heading X (X = 2-10) is moved up one level in the outline.
Ctrl+Tab At the start of a heading, inserts a tab stop. Depending on the Window Manager in use, Alt+Tab may be used instead. To change the heading level with the keyboard, first position the cursor in front of the heading.
==================
Please subscribe our channel, thanks
For modification please contact us, thanks
Please visit, thanks
Entertainment for Engineer's break time
Rixtronix LAB Channel
https://www.youtube.com/channel/UC89se0BZ2oGeqN5jNbDAyQQ
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks
Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢
Please share a coffee with me, thanks...
Motherboard Capacitors 1800uF 16V low ESR
https://www.ebay.com.au/itm/173840921403
Motherboard Capacitors 1000uF 16V low ESR
https://www.ebay.com.au/itm/173841745704
Arduino UNO R3 CH340 1Pc Brand NEW
https://www.ebay.com.au/itm/174444869277
Arduino Mega 2560 Brand NEW
https://www.ebay.com.au/itm/174807545008
7812 Regulator Chip 12V TO-220
http://www.ebay.com.au/itm/173840902816
7805 5V Voltage Regulator 10 Pieces
http://www.ebay.com.au/itm/173373792576
MC34063 DC-DC converter control circuits DIP8 5Pcs
http://www.ebay.com.au/itm/173840921443
1N5822 Diode 10pcs 3A 40V Fast Recovery Schottky diode
https://www.ebay.com.au/itm/174166491028
3D Printer Melzi 2.0 1284P Mainboard PR Usa 1Pcs
http://www.ebay.com.au/itm/173831753941
3D Printer LCD Module 20x4 1Pc
https://www.ebay.com.au/itm/173838265965
Mechanical Watch 6 hands Automatic 1Pcs
https://www.ebay.com.au/itm/173840921415
Rixtronix Store,electronic components,3D Printer Parts and electronic modules
https://www.ebay.com.au/str/rixtronix
Please donate for buying my children's milk, thanks
http://PayPal.Me/rixtronix
MAX485 SOP8 5Pcs
https://www.ebay.com.au/itm/173840921384
Tapped Spacer M3x25 5Pcs
https://www.ebay.com.au/itm/173841750164
XR2206CP Kit with casing 1Pc
https://www.ebay.com.au/itm/174470814321
4x4 Keypad Button 1Pc
https://www.ebay.com.au/itm/174594082958
High Voltage Capacitor 22uF 400V 5Pcs
https://www.ebay.com.au/itm/174594077962
3D Printed Look Keo Cleat Thicker Hook Areas 1pair, I've tested for more than 1 year ride
https://www.ebay.com.au/itm/173910460603
Female to Female jumper wire 40 Pins 1 Pc
https://www.ebay.com.au/itm/174157283872
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks
Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢
Rixtronix LAB Log
https://rixtronixlab.blogspot.com/
https://rixtronix.joomla.com/
https://bianchi77.wordpress.com/
==================
Buy local, helps Australian grows,
Offer :
Offer :
Offer :
Buy local , helps Australian grows
Offer :
Offer :
Buy local , helps Australian grows
Offer :
Buy local , helps Australian grows
Offer :
Buy local, helps Australian grows,
Offer :
Buy local, helps Australian grows,
Offer :
==================
PCBWay, PCB Prototype the Easy Way
==================
Rixtronix LAB is volunteering on fixing electronic appliances
such as LED,LCD TV, amplifier,computer, power supply ,PS4,XBOX and so on, for local area only.
Please contact us
Rixtronix LAB 志愿维修电子设备
如LED、液晶电视、功放、电脑、电源、PS4、XBOX等,仅限本地使用。
请联系我们
路加福音 16 19 31 V10 The rich man and Lazarus
路加福音 16:19-31
财主和拉撒路
19 “有一个财主,
身穿紫色和细麻衣,
天天过着奢侈的生活。
20 在他家门口躺着
一个叫拉撒路的乞丐,
身上长满了疮,
21 想吃财主桌子
上掉下来的东西。
连狗都过来舔他的疮。
22 “时候到了,
乞丐死了,
天使把他带到亚伯拉罕身边。
财主也死了,
被埋葬了。
23 他在阴间受苦,
举目看见远处的亚伯拉罕,
拉撒路在他身边。
24 他就呼唤他说:
“我祖亚伯拉罕,
可怜我吧,
打发拉撒路
用指尖蘸点水,
凉凉我的舌头,
因为我在这火
中非常痛苦。”
25 “亚伯拉罕回答说:
‘孩子,你要记住,
你生前受过好东西,
拉撒路受过坏事,
但现在他在这里得到安慰,
你却在痛苦中。
26除此之外,
我们和你们之间已经形成了
一个巨大的鸿沟,
以至于那些想从这里到
你们那里的人不能,
也不能从那里越过我们那里。
27 “他回答说:
‘父亲,我求你打
发拉撒路到我家去,
28 因为我有五个兄弟。
让他警告他们,
以免他们也来到
这个受折磨的地方。
29 “亚伯拉罕回答说:
‘他们有摩西和先知;
让他们听他们的。
30 “‘不,亚伯拉罕祖宗,
’他说,‘但如果有人从
死者那里去,
他们就会悔改。’
31 “他对他说:
‘如果他们不听摩西
和先知的话,
即使有人从死里复活,
他们也不会信服。’”
Lù jiā fúyīn 16:19-31
Cáizhǔ hé lā sā lù
19 “yǒu yīgè cáizhǔ,
shēn chuān zǐsè hé xì máyī,
tiāntiānguòzhe shēchǐ de shēnghuó.
20 Zài tā jiā ménkǒu tǎngzhe
yīgè jiào lā sā lù de qǐgài,
shēnshang zhǎng mǎnle chuāng,
21 xiǎng chī cáizhǔ zhuōzi
shàng diào xiàlái de dōngxī.
Lián gǒu dōu guòlái tiǎn tā de chuāng.
22 “Shíhòu dàole,
qǐgài sǐle,
tiānshǐ bǎ tā dài dào yàbólāhǎn shēnbiān.
Cáizhǔ yě sǐle,
bèi máizàngle.
23 Tā zài yīnjiān shòukǔ,
jǔmù kànjiàn yuǎn chǔ de yàbólāhǎn,
lā sā lù zài tā shēnbiān.
24 Tā jiù hūhuàn tā shuō:
“Wǒ zǔ yàbólāhǎn,
kělián wǒ ba,
dǎfā lā sā lù
yòng zhǐ jiān zhàn diǎn shuǐ,
liáng liáng wǒ de shétou,
yīnwèi wǒ zài zhè huǒ zhōng
fēicháng tòngkǔ.”
25 “Yàbólāhǎn huídá shuō:
‘Háizi, nǐ yào jì zhù,
nǐ shēngqián shòuguò hǎo dōngxī,
lā sā lù shòuguò huàishì,
dàn xiànzài tā zài zhèlǐ dédào ānwèi,
nǐ què zài tòngkǔ zhōng.
26 Chú cǐ zhī wài,
wǒmen hé nǐmen zhī jiān yǐjīng xíngchéngle
yīgè jùdà de hónggōu,
yǐ zhìyú nàxiē xiǎng cóng zhèlǐ dào
nǐmen nàlǐ de rén bùnéng,
yě bùnéng cóng nàlǐ yuèguò wǒmen nàlǐ.
27 “Tā huídá shuō:
‘Fùqīn, wǒ qiú nǐ dǎ fā
lā sā lù dào wǒjiā qù,
28 yīnwèi wǒ yǒu wǔ gè xiōngdì.
Ràng tā jǐnggào tāmen,
yǐmiǎn tāmen yě lái dào
zhège shòu zhémó dì dìfāng.
29 “Yàbólāhǎn huídá shuō:
‘Tāmen yǒu móxī hé xiānzhī;
ràng tāmen tīng tāmen de.
30 “‘Bù, yàbólāhǎn zǔzōng,
’ tā shuō,‘dàn rúguǒ yǒurén cóng
sǐzhě nàlǐ qù,
tāmen jiù huì huǐgǎi.’
31 “Tā duì tā shuō:
‘Rúguǒ tāmen bù tīng móxī
hé xiānzhī dehuà,
jíshǐ yǒurén cóng sǐ lǐ fùhuó,
tāmen yě bù huì xìnfú.’”
Luke 16:19-31
The rich man and Lazarus
19 "There was a rich man,
Dressed in purple and fine linen,
Live a luxurious life every day.
20 Lying in front of his house
A beggar named Lazarus,
covered with sores,
21 Want to eat rich man table
things that fall off.
Even the dogs came to lick his sores.
22 "The time has come,
the beggar is dead,
The angel took him to Abraham.
The rich man also died,
was buried.
23 He suffered in hell,
He lifted up his eyes and saw Abraham in the distance,
Lazarus was by his side.
24 He called to him and said:
"My father Abraham,
have pity on me,
send Lazarus
Dip your fingertips in some water,
cool my tongue,
'Cause I'm on fire
very painful. "
25 "Abraham answered:
'Child, you have to remember,
You had good things in your life,
Lazarus suffered bad things,
But now he is comforted here,
You are in pain.
26 In addition to this,
We have formed a relationship with you
a huge gulf,
so that those who want to get from here to
You who are there cannot,
Nor can it pass us from there.
27" He replied:
'Father, I beg you
Phlazarus came to my house,
28 Because I have five brothers.
let him warn them,
lest they also come
This tortured place.
29 "Abraham answered:
'They had Moses and the prophets;
Let them listen to them.
30 "'No, the father of Abraham,
' he said, 'but if someone
to the dead
They will repent. ’
31 "He said to him:
'If they don't listen to Moses
and the words of the prophets,
Even if someone rises from the dead,
Nor will they be convinced. ’”
In this video,
Open Office Keyboard Shortcut
Copy - Ctrl-C
Cut - Ctrl-X
Select All - Ctrl All
Undo - Ctrl-Z
Header :
Main Menu--Insert -- Fields -- Date ,Alt-I -- D -- D
Main Menu--Insert -- Fields -- Time
Main Menu--Insert -- Fields -- Page Number
Main Menu--Insert -- Fields -- Page Count
Main Menu--Insert -- Fields -- Author
Ctrl+A Select All.
Ctrl+J Justify.
Ctrl+D Double Underline.
Ctrl+E Centred.
Ctrl+F Find and Replace.
Ctrl+Shft+P Superscript.
Ctrl+L Align Left.
Ctrl+R Align Right.
Ctrl+Shft+B Subscript.
Ctrl+Y Redo last action.
Ctrl+0 (zero) Apply Default paragraph style.
Ctrl+1 Apply Heading 1 paragraph style.
Ctrl+2 Apply Heading 2 paragraph style.
Ctrl+3 Apply Heading 3 paragraph style.
Ctrl+5 1.5 Line Spacing.
Ctrl+ Plus Key(+) Calculates the selected text and copies the result to the clipboard.
Ctrl+Hyphen(-) Custom hyphens; hyphenation set by you.
Ctrl+Shft+minus sign (-) Non-breaking dash (is not used for hyphenation).
Ctrl+multiplication sign * (only on number pad) Run macro field.
Ctrl+Space Non-breaking spaces. Non-breaking spaces are not used for hyphenation and are not expanded if the text is justified.
Shft+Enter Line break without paragraph change.
Ctrl+Enter Manual page break.
Ctrl+Shft+Enter Column break in multi-columnar texts.
Alt+Enter Inserting a new paragraph without numbering.
Alt+Enter Inserting a new paragraph directly before or after a section or a table.
Arrow Left Move cursor to left.
Shft+Arrow Left Move cursor with selection to the left.
Ctrl+Arrow Left Go to beginning of word.
Ctrl+Shft+Arrow Left Selecting to the left word by word.
Arrow Right Move cursor to right.
Shft+Arrow Right Move cursor with selection to the right.
Ctrl+Arrow Right Go to end of word.
Ctrl+Shft+Arrow Right Selecting to the right word by word.
Arrow Up Move up one line.
Shft+Arrow Up Selecting lines in an upwards direction.
Arrow Down Move cursor down one line.
Shft+Arrow Down Selecting lines in a downward direction.
Home Go to beginning of line.
Shft+Home Go and select to the beginning of a line.
End Go to end of line.
Shft+End Go and select to end of line.
Ctrl+Home Go to start of document.
Ctrl+Shft+Home Go and select text to start of document.
Ctrl+End Go to end of document.
Ctrl+Shft+End Go and select text to end of document.
Ctrl+PageUp Switch cursor between text and header.
Ctrl+PageDown Switch cursor between text and footer.
Insert Insert mode on/off.
PageUp Screen page up.
Shft+PageUp Move up screen page with selection.
PageDown Move down screen page.
Shft+PageDown Move down screen page with selection.
Ctrl+Del Delete text to end of word.
Ctrl+Backspace Delete text to beginning of word.
Ctrl+Shft+Del Delete text to end of sentence.
Ctrl+Shft+Backspace Delete text to beginning of sentence.
Ctrl+Tab Next suggestion with Automatic Word Completion.
Ctrl+Shft+Tab Use previous suggestion with Automatic Word Completion.
Alt+W Spell checker dialog: Call back the original unknown word into the text box.
Ctrl+ double-click or Ctrl+Shft+F10
Tables
Ctrl+A If the active cell is empty, Ctrl+A selects the whole table; otherwise it selects the contents of the active cell. Pressing Ctrl+A a second time selects the entire table.
Ctrl+Home If the active cell is empty, Ctrl+Home moves the cursor to the beginning of the table. Pressing Ctrl+Home again moves the cursor to the beginning of document. If the active cell is not empty, Ctrl+Home moves the cursor to the beginning of the active cell. Pressing Ctrl+Home a second time moves the cursor to the beginning of the current table. A third press moves the cursor to the beginning of the document.
Ctrl+End If the active cell is empty, Ctrl+End moves the cursor to the end of the table. Pressing Ctrl+End again moves the cursor to the end of document. If the active cell is not empty, Ctrl+End moves the cursor to the end of the active cell. Pressing Ctrl+End a second time moves the cursor to the end of the current table. A third press moves the cursor to the end of the document.
Ctrl+Tab Inserts a tab stop (only in tables). Depending on the Window Manager in use, Alt+Tab may be used instead.
Ctrl+Shft+Arrow Up Jumps to start of table.
Ctrl+Shft+Arrow Down Jumps to end of table.
Alt+Arrow Keys Increases or decreases the size of the column or row on the right or bottom cell edge.
Alt+Shft+Arrow Keys Increases or decreases the size of the column or row on the left or top cell edge.
Ctrl+Alt+Shft+Arrow Keys Like Alt, but only the active cell is modified.
Alt+Insert Provides 3 seconds in Insert mode, during which time pressing an Arrow key inserts a row or column, or Ctrl+Arrow Key will insert a cell.
Alt+Del Provides 3 seconds in Delete mode, during which time pressing an Arrow key deletes a row or column, or Ctrl+Arrow Key merges the active cell with the neighbouring cell.
Ctrl+Shft+T Removes cell protection from all selected tables. If no table is selected, then cell protection is removed from all of the tables in the document.
Ctrl+Shft+Del If nothing is selected, the contents of the next cell will be deleted. If cells are selected, the whole row(s) of the selection will be deleted. If all rows are selected completely or partially, the entire table will be deleted.
Paragraphs and heading levels
Ctrl+Alt+Up Arrow or Ctrl+Up Arrow Moves the active paragraph or selected paragraphs up one paragraph.
Ctrl+Alt+Down Arrow or Ctrl+Down Arrow Moves the active paragraph or selected paragraphs down one paragraph.
Tab The heading in format Heading X (X = 1-9) is moved down one level in the outline.
Shft+Tab The heading in format Heading X (X = 2-10) is moved up one level in the outline.
Ctrl+Tab At the start of a heading, inserts a tab stop. Depending on the Window Manager in use, Alt+Tab may be used instead. To change the heading level with the keyboard, first position the cursor in front of the heading.
==================
Support us by subscribing our channel, thanks
For modification please contact us, thanks
Please visit, thanks
Donation from Rixtronix LAB for the people, please enjoy and share a coffee with me,thanks
Entertainment for Engineer's break time
Rixtronix LAB Channel
https://www.youtube.com/channel/UC89se0BZ2oGeqN5jNbDAyQQ
Rixtronix LAB partner
https://au.linkedin.com/in/simonskchan
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks
Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢
Please share a coffee with me, thanks...
XR2206CP Kit with casing 1Pc
https://www.ebay.com.au/itm/174470814321
4x4 Keypad Button 1Pc
https://www.ebay.com.au/itm/174594082958
High Voltage Capacitor 22uF 400V 5Pcs
https://www.ebay.com.au/itm/174594077962
3.2V 64Ah pre-welded cell pack 1Pc
https://www.ebay.com.au/itm/174560975159
SATA 3.0 Cable Straight Blue 1Pc
https://www.ebay.com.au/itm/174393207716
Motherboard Capacitors 1800uF 16V low ESR
https://www.ebay.com.au/itm/173840921403
Motherboard Capacitors 1000uF 16V low ESR
https://www.ebay.com.au/itm/173841745704
Arduino Uno R3 Brand NEW
https://www.ebay.com.au/itm/173828695857
Arduino Mega 2560 Brand NEW
http://www.ebay.com.au/itm/173846013344
7812 Regulator Chip 12V TO-220
http://www.ebay.com.au/itm/173840902816
7805 5V Voltage Regulator 10 Pieces
http://www.ebay.com.au/itm/173373792576
MC34063 DC-DC converter control circuits DIP8 5Pcs
http://www.ebay.com.au/itm/173840921443
1N5822 Diode 10pcs 3A 40V Fast Recovery Schottky diode
https://www.ebay.com.au/itm/174166491028
3D Printer Melzi 2.0 1284P Mainboard PR Usa 1Pcs
http://www.ebay.com.au/itm/173831753941
3D Printer LCD Module 20x4 1Pc
https://www.ebay.com.au/itm/173838265965
Mechanical Watch 6 hands Automatic 1Pcs
https://www.ebay.com.au/itm/173840921415
Rixtronix Store,electronic components,3D Printer Parts and electronic modules
https://www.ebay.com.au/str/rixtronix
Please donate for buying my children's milk, thanks
http://PayPal.Me/rixtronix
MAX485 SOP8 5Pcs
https://www.ebay.com.au/itm/173840921384
Tapped Spacer M3x25 5Pcs
https://www.ebay.com.au/itm/173841750164
2.4" TFT LCD Module For Arduino,AVR,STM32 ILI9325
https://www.ebay.com.au/itm/173951188072
3D Printed Look Keo Cleat Thicker Hook Areas 1pair, I've tested for more than 1 year ride
https://www.ebay.com.au/itm/173910460603
Female to Female jumper wire 40 Pins 1 Pc
https://www.ebay.com.au/itm/174157283872
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks
Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢
Rixtronix LAB Log
https://rixtronixlab.blogspot.com/
https://rixtronix.joomla.com/
https://bianchi77.wordpress.com/
==================
Offer :
Buy local , helps Australian grows
Buy local, helps Australian grows,
Offer :
Offer :
Offer :
Buy local , helps Australian grows
Offer :
Offer :
Buy local , helps Australian grows
Offer :
Buy local , helps Australian grows
Offer :
Buy local, helps Australian grows,
Offer :
Designing 4543 CMOS Clock Altium Pt39
PCB Editor Only Shortcuts
Shift+R
Cycle through three routing modes
Shift+E
Toggle electrical grid on/off
Shift+B
Build Query
Shift+Page Up/ Page Down
Zoom-in/ zoom-out in small increments
Ctrl+Page Up
Zoom-in to 400%
Ctrl+Page Down
Fit document into view
Ctrl+End
Jump to defined relative origin for the workspace
Alt+End
Redraw current layer only
Alt+Insert
Paste on current layer
Ctrl+G
Pop up Snap Grid dialog
G
Pop up Snap Grid menu
N
Hide the ratsnest while moving a component
L
Flip component being moved to other side of board
Shift+F1
Pressed while routing, then displays the appropriate interactive routing shortcut keys
F2
Display Board Insight and Heads Up display options
Ctrl+Left-click
Highlight routed net under cursor (repeat in free space to clear)
Ctrl+Spacebar
Cycle through connection lines modes during interactive routing
Backspace
Remove last track corner during interactive routing
Shift+S
Toggle single layer mode on/off
O, then D, then D, then Enter
Set all primitives to display in draft mode
O, then D, then F, then Enter
Set all primitives to display in final mode
O, then D/Ctrl+D
Access Show/Hide page of View Configurations dialog
L
Access Board Layers and Colors page of View Configurations dialog
Ctrl+H
Select connected copper
Ctrl+Shift+Left-click & hold
Break track
Shift+Ctrl+Left-click
Highlight additional routed net under cursor
+/- on numeric keypad
Next/ previous layer
Ctrl+Click
Highlights layer content on layer tabs
Ctrl+Shift+Click
Increments highlighting on layer tabs
Ctrl+Alt+Mouse
Hovers highlight layer on layer tabs
* on Numeric keypad
Next routing layer
M
Display Move sub-menu
Alt
Hold to temporarily switch from avoid-obstacle to ignore-obstacle mode
Ctrl
Hold to temporarily disable electrical grid while routing
Ctrl+M
Measure distance
Spacebar (in interactive process)
Rotate object anti-clockwise (define rotation step on PCB Editor – General page of Preferences dialog)
Spacebar (during interactive routing)
Toggle start/End mode
Shift+Spacebar (in interactive process)
Rotate object being moved clockwise
Shift+Spacebar (during interactive routing)
Step through corner modes during interactive routing
[/ ]
Decrease/ Increase mask level for permanent filter
Alt+Left Arrow/ Right Arrow
View previous/ next component for active library document
Q
Toggle units (metric/imperial)
T, then B
Access 3D Body Manager dialog
T, then P
Access Preferences dialog
Shift+Mouse-wheel
Pan left/right
Ctrl+Mouse-wheel
Zoom in/ out incrementally
Ctrl+Right drag
Zoom in/ out smoothly
Ctrl+C
Create clipboard bitmap (.bmp) image of current 3D view
Page Up/ Page Down
Zoom in/out incrementally
T, then P
Access PCB Editor – Display page of Preferences dialog
L
Access Physical Materials (3D) page of View Configurations dialog
9. 3D Body Placement Shortcuts
+/-
Next/ previous layer
L
Flip 3D body to paired mechanical Layer
X
Flip 3D body around X-axis
Y
Flip 3D body around Y-axis
Spacebar
Rotate 3D body counterclockwise
Shift+Spacebar
Rotate 3D body clockwise
2
Rotate 3D body counterclockwise around it's X-axis
3
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
4
Rotate 3D body counterclockwise around it's Y-axis
6
Rotate 3D body clockwise around it's Y-axis
8
Rotate 3D body clockwise around it's X-axis
9
Decrease 3D body standoff height (Z-axis) by one Snap Grid increment
Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by one Snap Grid increment
Shift+Left Arrow/ Right Arrow
Move 3D body left/ right along X-axis by 10x Snap Grid increment
Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by one Snap Grid increment
Shift+Up Arrow/ Down Arrow
Move 3D body backward/ forward along Y-axis by 10x Snap Grid increment
==================
Please subscribe our channel, thanks
For modification please contact us, thanks
Please visit, thanks
Entertainment for Engineer's break time
Rixtronix LAB Channel
https://www.youtube.com/channel/UC89se0BZ2oGeqN5jNbDAyQQ
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks
Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢
Please share a coffee with me, thanks...
3.2V 64Ah pre-welded cell pack 1Pc
https://www.ebay.com.au/itm/174560975159
SATA 3.0 Cable Straight Blue 1Pc
https://www.ebay.com.au/itm/174393207716
Motherboard Capacitors 1800uF 16V low ESR
https://www.ebay.com.au/itm/173840921403
Motherboard Capacitors 1000uF 16V low ESR
https://www.ebay.com.au/itm/173841745704
Arduino Uno R3 Brand NEW
https://www.ebay.com.au/itm/173828695857
Arduino Mega 2560 Brand NEW
http://www.ebay.com.au/itm/173846013344
7812 Regulator Chip 12V TO-220
http://www.ebay.com.au/itm/173840902816
7805 5V Voltage Regulator 10 Pieces
http://www.ebay.com.au/itm/173373792576
MC34063 DC-DC converter control circuits DIP8 5Pcs
http://www.ebay.com.au/itm/173840921443
1N5822 Diode 10pcs 3A 40V Fast Recovery Schottky diode
https://www.ebay.com.au/itm/174166491028
3D Printer Melzi 2.0 1284P Mainboard PR Usa 1Pcs
http://www.ebay.com.au/itm/173831753941
3D Printer LCD Module 20x4 1Pc
https://www.ebay.com.au/itm/173838265965
Mechanical Watch 6 hands Automatic 1Pcs
https://www.ebay.com.au/itm/173840921415
Rixtronix Store,electronic components,3D Printer Parts and electronic modules
https://www.ebay.com.au/str/rixtronix
Please donate for buying my children's milk, thanks
http://PayPal.Me/rixtronix
MAX485 SOP8 5Pcs
https://www.ebay.com.au/itm/173840921384
Tapped Spacer M3x25 5Pcs
https://www.ebay.com.au/itm/173841750164
STM32L011 Nucleo 32
https://www.ebay.com.au/itm/173846014737
3D Printed Look Keo Cleat Thicker Hook Areas 1pair, I've tested for more than 1 year ride
https://www.ebay.com.au/itm/173910460603
Female to Female jumper wire 40 Pins 1 Pc
https://www.ebay.com.au/itm/174157283872
Belajar Matematika Online Bersama Ibu Francisca Eka Kristianti
https://www.youtube.com/channel/UCw72bAOSOzYtvoocTogtsKw
Belajar Fotografi | Photography untuk Pemula | Kamera Digital DSLR & Mirrorless Terbaik
Video channel for photographer
==================
==================
PCBWay, PCB Prototype the Easy Way
==================
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks
Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢
Rixtronix LAB Log
https://rixtronixlab.blogspot.com/
https://rixtronix.joomla.com/
https://bianchi77.wordpress.com/
==================
Offer :
Offer :
Buy local, helps Australian grows,
Offer :
=========================================
Other items to offer :
Buy local , helps Australian grows
=========================================
Other items to offer :
Buy local , helps Australian grows
Offer : Offer :
=========================================
Other items to offer :
Buy local , helps Australian grows
=========================================
Other items to offer :
Buy local , helps Australian grows
=========================================
Other items to offer :
Buy local , helps Australian grows
Bike siren Bill Of Materials
|
Designing Nucleo F411 Case Solidworks Pt28
Standard Windows shortcuts:
Ctrl + O for File, Open
Ctrl + S for File, Save
Ctrl + Z for Edit, Undo
Ctrl + C for Copy
Ctrl + V for Paste
Alt + specified values Inserts standard Windows symbols:
Alt + 0176. Inserts a degree º symbol
Alt + 0216. Inserts a diameter Ø symbol
Alt + 0181. Inserts a µ symbol
User interface shortcuts:
Ctrl + Q Complete Rebuild
Ctrl + Tab Moves among open documents
Enter Repeats the last command
Display shortcuts:
Alt + arrow keys Rotates the model parallel to the viewing plane
Alt + drag the middle mouse button Rotates the model parallel to the viewing plane
Shift + arrow keys Rotates the model 90º
Shift + Z Zooms the model in.
Z Zooms the model out.
F Zooms to fit.
Alt + click Shows a hidden body or component when you hover over the body or component
G Magnifying Glass
Alt + middle mouse wheel Shows a section view when using the magnifying glass
Spacebar Opens the View Selector and Orientation dialog box
Selection shortcuts:
Ctrl + click Lets you select multiple entities
Shift Lets you select a transparent face on a part
Shift + click Selects everything within the two selected items in the FeatureManager design tree
Move shortcuts:
Ctrl + drag the middle mouse button Pans a model
Shift + drag
Sketches. Moves a set of sketch entities.
Parts. Moves a feature.
Drawings. Moves the selected drawing view and any related views together as if they are one entity. You can also move a dimension to a different view.
Dimension shortcuts:
Alt + click Turns off automatic alignment when you place dimensions and annotations
Alt + drag Moves an annotation independently from the group in which it is contained
Ctrl + drag Creates additional leaders on a note when you Ctrl + drag a leader’s arrowhead
Shift + click Snaps a dimension to the max or min location when dimensioning arcs and circles with the Smart Dimension tool
Sketching shortcuts:
Ctrl + drag Suppresses inference lines when dragging an endpoint
Pressing Ctrl while sketching turns off automatic sketch relations
Shift + click Turns on snapping
Shift + drag When sketching a line, the line snaps to specific lengths
Tab Changes the XYZ plane when sketching in a 3D sketch
Assembly shortcuts:
Alt + drag
Mates. Creates a SmartMate when you Alt + drag a component
Reordering components. When moving a component in the FeatureManager design tree, ensures that the component remains at the same level in the tree and prevents it from being moved into a subassembly
Alt + Ctrl drag Copies the component and creates a SmartMate
Ctrl + drag
Copies a component when you Ctrl + drag it
Selection. In an assembly with preselected components, inverts the selection when you Ctrl + drag a selection box
Toolbox. Creates a part instead of a configuration when you drag a Toolbox component into an assembly
Tab
Hide/Show. Hides all components below the pointer
While Inserting a Component. Rotates the component 90º
Shift + Tab
Hide/Show. Shows all components below the pointer
While Inserting a Component. Rotates the component -90º
Ctrl + Shift + Tab Temporarily displays all hidden components as transparent and lets you select which ones to show
==================
Support us by subscribing our channel, thanks
For modification please contact us, thanks
Please visit, thanks
Donation from Rixtronix LAB for the people, please enjoy and share a coffee with me,thanks
Entertainment for Engineer's break time
Rixtronix LAB Channel
https://www.youtube.com/channel/UC89se0BZ2oGeqN5jNbDAyQQ
Rixtronix LAB partner
https://au.linkedin.com/in/simonskchan
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks
Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢
Please share a coffee with me, thanks...
XR2206CP Kit with casing 1Pc
https://www.ebay.com.au/itm/174470814321
4x4 Keypad Button 1Pc
https://www.ebay.com.au/itm/174594082958
High Voltage Capacitor 22uF 400V 5Pcs
https://www.ebay.com.au/itm/174594077962
3.2V 64Ah pre-welded cell pack 1Pc
https://www.ebay.com.au/itm/174560975159
SATA 3.0 Cable Straight Blue 1Pc
https://www.ebay.com.au/itm/174393207716
Motherboard Capacitors 1800uF 16V low ESR
https://www.ebay.com.au/itm/173840921403
Motherboard Capacitors 1000uF 16V low ESR
https://www.ebay.com.au/itm/173841745704
Arduino Uno R3 Brand NEW
https://www.ebay.com.au/itm/173828695857
Arduino Mega 2560 Brand NEW
http://www.ebay.com.au/itm/173846013344
7812 Regulator Chip 12V TO-220
http://www.ebay.com.au/itm/173840902816
7805 5V Voltage Regulator 10 Pieces
http://www.ebay.com.au/itm/173373792576
MC34063 DC-DC converter control circuits DIP8 5Pcs
http://www.ebay.com.au/itm/173840921443
1N5822 Diode 10pcs 3A 40V Fast Recovery Schottky diode
https://www.ebay.com.au/itm/174166491028
3D Printer Melzi 2.0 1284P Mainboard PR Usa 1Pcs
http://www.ebay.com.au/itm/173831753941
3D Printer LCD Module 20x4 1Pc
https://www.ebay.com.au/itm/173838265965
Mechanical Watch 6 hands Automatic 1Pcs
https://www.ebay.com.au/itm/173840921415
Rixtronix Store,electronic components,3D Printer Parts and electronic modules
https://www.ebay.com.au/str/rixtronix
Please donate for buying my children's milk, thanks
http://PayPal.Me/rixtronix
MAX485 SOP8 5Pcs
https://www.ebay.com.au/itm/173840921384
Tapped Spacer M3x25 5Pcs
https://www.ebay.com.au/itm/173841750164
2.4" TFT LCD Module For Arduino,AVR,STM32 ILI9325
https://www.ebay.com.au/itm/173951188072
3D Printed Look Keo Cleat Thicker Hook Areas 1pair, I've tested for more than 1 year ride
https://www.ebay.com.au/itm/173910460603
Female to Female jumper wire 40 Pins 1 Pc
https://www.ebay.com.au/itm/174157283872
Rixtronix LAB is looking for local engineering bussiness partner, please contact us, thanks
Rixtronix LAB 正在寻找当地工程业务合作伙伴,请与我们联系,谢谢
Rixtronix LAB Log
https://rixtronixlab.blogspot.com/
https://rixtronix.joomla.com/
https://bianchi77.wordpress.com/
==================
Offer :
Buy local , helps Australian grows
Buy local, helps Australian grows,
Offer :
Offer :
Offer :
Buy local , helps Australian grows
Offer :
Offer :
Buy local , helps Australian grows
Offer :
Buy local , helps Australian grows
Offer :
Buy local, helps Australian grows,
Offer :
Page 41 of 567